Initial Inspection and Diagnostic Overview
Rear Entertainment System Self-Diagnostic Function
The rear entertainment system has a self-diagnostic function that shows on the display. To run the self-diagnostic function, do the following:
NOTE:
- The wireless headphones LED blinks at one second intervals when in self-diagnostic function.
- While in self-diagnostic function, the headphone sound is intermittent.
How to Enter the Self-Diagnostic Function with the Audio Unit
1. Turn the ignition switch to ON (II). Make sure the REAR POWER button to off.
2. To run the self-diagnosis, press and hold the REAR POWER button (A) for one second, then press it 3 more times within 3 seconds. On the last press, hold the REAR POWER button until the diagnostic screen appears.
How to Enter the Self-Diagnostic Function with the Wireless Remote Control
1. Turn the ignition switch to ON (II).
2. To run the self-diagnosis, press and release these buttons in this order:
- Ultrawide RES type: The SOURCE button, the SWAP button, the TUNE/SKIP () button, and then the SWAP button again. Press the buttons within 2 seconds of each other to start the self-diagnostic function.
- RES type: The DVD/AUX button, the FM/AM button, the TUNE/SKIP () button, and then the FM/AM button again. Press the buttons within 2 seconds of each other to start the self-diagnostic function.
Canceling the Self-Diagnostic Function
Turn the ignition switch to LOCK (0) to cancel the self-diagnostic function. After completing the repair work, run the self-diagnostic function again to make sure that there are no other malfunctions.
Self-Diagnostic Function Mode Display
UNIT CHECK (Ultrawide RES type)
The screen displays the device version, the self-diagnostic status, and the screen status while in this self-diagnostic mode.
UNIT CHECK (RES type)
The screen displays the device version, the self-diagnostic status, and the screen status while in this self-diagnostic mode.