Rear Bumper Step Replacement

Rear Bumper Step Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the rear bumper.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the rear bumper Rear Bumper Removal/Installation.

2. From inside of the rear bumper (A), release the hooks, then remove the rear bumper step (B).





3. Fit all the hooks into the holes in the bumper, then push on the step until the hooks snap into place.

4. Reinstall the rear bumper Rear Bumper Removal/Installation.