Second Row Seat Armrest Replacement

Second Row Seat Armrest Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the armrest (A).

1. Remove the cap (B) with a trim tool.

2. Remove the armrest center bolt (C), then remove the armrest.

3. If necessary, remove the bushing (D), the nylon washer (E), and the armrest center pin (F).





2. Install the armrest in the reverse order of removal, and make sure the bushing and the nylon washer are installed properly.