Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Power Mirror Replacement
Power Mirror Replacement
NOTE: Take care not to scratch the door or the related parts.
1. Lower the glass fully.
2. Remove the door mirror cover (A).
1. With your hand, carefully pull out the top edge of the door mirror cover to release the hooks (B) and detach the clips.
2. With BSI: Disconnect the BSI alert indicator connector (C).
NOTE: Be careful when removing and installing the door mirror cover, as its lower edge can damage the door panel.
3. Remove the door panel Service and Repair.
4. Disconnect the power mirror connector (A), and detach the harness clip (B).
5. While holding the power mirror (C), remove the nuts securing the mirror.
6. While holding the power mirror (A), detach the clip (B), then remove the power mirror.
7. Install the mirror in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure each connector is plugged in properly.
- Push the clips and the hooks into place securely.