Power Lumbar Support Motor Test

Power Lumbar Support Motor Test

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service Precautions before doing repairs or servicing.

1. Turn over the driver's seat-back cover/pad as needed Service and Repair.

2. Remove the lumbar support motor cover (A).






3. Disconnect the 2P connector (B) from the lumbar support motor (C).

4. Test the motor by applying battery power and body ground to the terminals.





5. If the motor does not run or fails to run smoothly, the motor is faulty, replace the driver's seat frame assembly Front Seat Frame Replacement.