Front Seat Frame Replacement

Front Seat Frame Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service Precautions before doing repairs or service.

NOTE:

- If the side airbag has deployed, replace the seat frame and related parts with new ones Service and Repair.
- Put on gloves to protect your hands.
- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the front seat Removal and Replacement.

2. Remove these items:

- Front seat-back cover/pad Service and Repair
- Front seat cushion cover/pad Front Seat Cushion Cover Replacement
- Seat belt buckle
- Side airbag Side Airbag Replacement

3. Driver's seat: Detach the clips (A, B), then remove the outer cover (C).






4. Driver's seat: Detach the clip, then remove the upper rail inner cover (A).






5. Remove the screw. Detach the clips, then remove the riser cover (A).






6. Remove the recline inner cover (A) and the center inner cover (B) from the seat frame (C).





7. Install the seat frame in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clips into place securely.