Second Row Seat Recline Cover Removal/Installation

Second Row Seat Recline Cover Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Put on gloves to protect your hands.
- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- The left second row seat is shown; the right second row seat is similar.

1. Remove the second row seat.

2. Remove the recline cover (A).

1. Remove the recline knob (B).

2. Release the retainer clip (C), then remove the walk-in handle (D).

3. Remove the screws.

4. Pull out the cover, then release the tabs (E).





3. Remove the center cover (A).

1. Detach the clips.

2. Pull up the cover, then release the tabs (B) and the hook (C).





4. Install the recline cover in the reverse order of removal, and push the clips and the hook into place securely.