Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Front Individual Map Light Test/Replacement
Front Individual Map Light Test/Replacement
1. Turn the map light switch OFF.
2. Carefully pry the lens (A) off with a flat-tip screwdriver.
3. Remove the two screws, then remove the front individual map lights (B).
4. Disconnect the connectors (C) from the map lights.
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, check the bulb(s) (D). If the bulb(s) are OK, replace the map light.
7. Install the light in the reverse order of removal.