Fluid Filter - A/T: Service and Repair

ATF Filter Replacement

NOTE: The ATF filter is not a scheduled maintenance item. Replace the filter only if it is leaking, or contaminated, or when the transmission is being overhauled or replaced with a remanufactured unit.

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Remove the front splash shield Service and Repair.

3. Remove the drain plug (A), and drain the ATF.





4. Reinstall the drain plug with a new sealing washer (B).

5. Remove the harness clamp (A) from the ATF filter holder (B).





6. Disconnect the ATF cooler hoses (C) from the ATF filter (D).

7. Remove the ATF filter holder, and remove the ATF filter.

8. Install the ATF filter, and secure it with its holder and bolt.

9. Connect the ATF cooler hose ATF Cooler Hose Replacement (6-Speed A/T).

10. Install the harness clamp to the ATF filter holder.

11. Install the front splash shield Service and Repair.

12. Refill the transmission with ATF ATF Replacement (6-Speed A/T).