Power Seat Adjustment Switch Test/Replacement

Power Seat Adjustment Switch Test/Replacement

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service Precautions before doing repairs or servicing.

1. Remove the driver's seat Removal and Replacement.

2. Remove the power seat adjustment switch knobs (A) from the power seat adjustment switch (B).





3. Remove the driver's seat front cover Removal and Replacement and recline cover Front Seat Recline Cover Removal/Installation.

4. Disconnect the 12P connector from the switch, then remove the two screws.

5. Reinstall the adjustment switch knobs to the switch.

6. Check for continuity between the terminals in each position according to the table.





7. If the continuity is not as specified, replace the switch.

8. Install the part in the reverse order of removal.