Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Output Shaft (Countershaft) Speed Sensor Replacement (6-Speed A/T)
Output Shaft (Countershaft) Speed Sensor Replacement
1. Raise the vehicle on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
2. Remove the front splash shield Service and Repair.
3. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A).
4. Install a new O-ring (B) on the output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor.
5. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.
6. Install the front splash shield Service and Repair.