Torque Converter Housing Countershaft Bearing Replacement (6-Speed A/T)

Torque Converter Housing Countershaft Bearing Replacement

Special Tools Required

- Bearing Driver Attachment, 72 x 75 mm 07746-0010600
- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Driver Handle, 15 x 135L 07749-0010000

1. Remove the countershaft bearing from the torque converter housing using the 25-40 mm adjustable bearing puller and a commercially available 3/8 ''-16 slide hammer (A) .






2. Check the ATF guide plate (A), and replace it if it is damaged.





3. Install the bearing (B) in the direction shown.

4. Drive the bearing (A) in the torque converter housing using the 15 x 135L driver handle and the 72 x 75 mm bearing driver attachment; install the bearing outer notch-cut (B) to a depth (C) of 0-0.14 mm (0-0.0055 in) below the torque converter housing surface (D).