Torque Converter Housing Selector Control Shaft Bearing Replacement (6-Speed A/T)

Torque Converter Housing Selector Control Shaft Bearing Replacement

Special Tools Required

- Bearing Driver Attachment, 32 x 35 mm 07746-0010100
- Driver Handle, 15 x 135L 07749-0010000
- Slide Hammer 07936-371020A
- Bearing Remover Shaft Set, 15 mm 07936-KC10500

1. Remove the selector control shaft bearing from the torque converter housing using the 15 mm bearing remover shaft and the slide hammer.






2. Install the bearing until it bottoms out in the torque converter housing using the 15 x 135L driver handle and the 32 x 35 mm bearing driver attachment.