Torque Converter Housing Third Shaft Bearing Replacement (6-Speed A/T)

Torque Converter Housing Third Shaft Bearing Replacement

Special Tools Required

- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Bearing Driver Attachment, 52 x 55 mm 07746-0010400
- Driver Handle, 15 x 135L 07749-0010000

1. Remove the third shaft bearing from the torque converter housing using the 25-40 mm adjustable bearing puller and a commercially available 3/8 ''-16 slide hammer (A) .






2. Check the ATF guide plate (A), and replace it if it is damaged.





3. Install the bearing (B) in the torque converter housing.

4. Drive the bearing (A) into the torque converter housing using the 15 x 135L driver handle and the 52 x 55 mm bearing driver attachment; install the bearing to a depth (B) of 0-0.07 mm(0-0.0012 in) below the torque converter housing surface (C).