Output Shaft (Countershaft) Speed Sensor Replacement (5-Speed A/T)

Output Shaft (Countershaft) Speed Sensor Replacement

1. Remove the air intake scoop.

2. Do the battery removal procedure.

3. Remove the intake air duct.

4. Remove the air cleaner Service and Repair.

5. Remove the main under-hood fuse box.

6. Remove the battery base.

7. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A) with the sensor washer (B).





8. Install a new O-ring (C) on a new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor with the sensor washer.

9. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

10. Install the battery base.

11. Install the main under-hood fuse box.

12. Install the intake air duct.

13. Install the air cleaner Service and Repair.

14. Do the battery installation procedure.

15. Install the air intake scoop.