Transmission Fluid Pressure Switch D (5th Clutch) Replacement (6-Speed A/T)

Transmission Fluid Pressure Switch D (5th Clutch) Replacement

1. Raise the vehicle on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely supported.

2. Disconnect the transmission fluid pressure switch D (5th clutch) connector, and remove transmission fluid pressure switch D (5th clutch) and the sealing washer (A).





3. Install transmission fluid pressure switch D (5th clutch) with a new sealing washer, and tighten the switch.

4. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.