Front Door Window Motor: Service and Repair

Front Power Window Motor Removal and Installation

Removal

1. Remove the door panel Service and Repair.

2. Remove the door glass and regulator Front Door Glass And Regulator Replacement.

3. Remove the three screws (A), then remove the power window motor (B).






Installation

NOTE: The holes for the mounting screws in a new power window motor are not threaded. The screws cut threads in the holes the first time they are installed.

1. Install the power window motor (A) onto the regulator (B) as shown, and tighten the screws (C) until the screw head contacts with the linkage.

NOTE:

- Keep the screws perfectly straight while screwing them in.
- Do not use air tools or impact wrenches.
- Do not use any other screws; these screws are designed to cut the threads.





2. Loosen the screws , and retighten the screws to specified torque.

3. Install the door glass and regulator Front Door Glass And Regulator Replacement.

4. Install the door panel Service and Repair.

5. After replacement, reset the power window control unit Testing and Inspection.