B2628

DTC Troubleshooting: B2628

DTC B2628:

Right Front Sensor Failure

NOTE:

- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.
- Before troubleshooting, make sure the front part of the sensor is not dirty or covered with ice or snow.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Check for DTCs with the HDS.

Is DTC B2628 indicated?

YES -

Replace the right front corner sensor Front Corner Sensor Replacement.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections between the parking and back-up sensor control unit and the right front corner sensor.