Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Fx-11
SRS DTC Troubleshooting: Fx-11
DTC Fx-11 ("x" can be 0 thru 9 or A thru F):
Airbags And/or Tensioners Deployment Recorded
NOTE:
- Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components, of the correct part number, and that they were properly installed Service and Repair.
- Before doing this troubleshooting procedure, review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.
- Refer to the DTCs shown:
- DTC F1-11: Driver's airbag, left side curtain airbag and/or driver's seat belt tensioner deployed.
- DTC F2-11 Front passenger's airbag, right side curtain airbag and/or front passenger's seat belt tensioner deployed.
- DTC F3-11 Driver's side airbag, left side curtain airbag and/or driver's seat belt tensioner deployed.
- DTC F4-11 Front passenger's side airbag, right side curtain airbag and/or front passenger's seat belt tensioner deployed.
- DTC F5-11, F6-11 Both or only one side curtain airbag and seat belt tensioner deployed.
When any airbag or tensioners have deployed, go to Component Replacement/Inspection After Deployment Service and Repair.