Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
DTC Troubleshooting
DTC Troubleshooting: P1109
DTC P1109:
BARO Sensor Circuit Out of Range High
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information How To Troubleshoot The Fuel And Emissions Systems (FFV Models).
1. Reset the PCM with the HDS.
2. Start the engine.
3. Check for Pending or Confirmed DTCs with the HDS.
Is DTC P1109 indicated?
YES -
Go to step 4.
NO -
Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.
4. Update the PCM if it does not have the latest software PCM Update, or substitute a known-good PCM.
5. Check for Pending or Confirmed DTCs with the HDS.
Is DTC P1109 indicated?
YES -
If the PCM was updated, substitute a known-good PCM, then recheck. If the PCM was substituted, go to step 1.
NO -
If the PCM was updated, troubleshooting is complete. If the PCM was substituted, replace the original PCM PCM Replacement (FFV Models). If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.