Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0+1/-1 mm
(0+0.04/-0.04 in) all the way around. If not, make the following adjustment:





1. Adjust the glass (A).

- Turn the slit areas of the molding (B) up.
- Slightly loosen the TORX screws with a TORX T25 bit.
- Move the glass up or down.
- Tighten all screws securely.





2. If necessary, repeat on the opposite side.

3. Reset the moonroof control unit Testing and Inspection.