Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> Pilot 4WD V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Power Seat Adjustment Switch Test/Replacement (Without DPMS)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Seat Adjustment Switch Test/Replacement (Without DPMS)




Power Seat Adjustment Switch Test/Replacement

Driver's Seat without DPMS

NOTE:

- SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.
- Refer to power seat adjustment switch test/replacement Power Seat Adjustment Switch Test/Replacement (With DPMS) for driver's seat with DPMS.

1. Remove the driver's seat Front Seat Removal/Installation.

2. Remove the power seat adjustment switch knobs (A) and recline cover from the driver's seat Front Seat Recline Cover Removal/Installation, then remove the two screws and the power seat adjustment switch (B).





3. Disconnect the 12P connector from the power seat adjustment switch.

4. Reinstall the adjustment switch knobs to the switch.

5. Check for continuity between the terminals in each switch position according to the table.





6. If the continuity is not as specified, replace the switch.

Front Passenger's Seat

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the front passenger's seat Front Seat Removal/Installation.

2. Remove the power seat adjustment switch knobs (A) and recline cover from the front passenger's seat Front Seat Recline Cover Removal/Installation, then remove the two screws and the power seat adjustment switch (B).





3. Disconnect the 12P connector from the power seat adjustment switch.

4. Reinstall the adjustment switch knobs to the switch.

5. Check for continuity between the terminals in each switch position according to the table.





6. If the continuity is not as specified, replace the switch.

pro multis · About Operation CHARM