Front Individual Map Light Test/Replacement

Front Individual Map Light Test/Replacement

1. Turn the map light switch OFF.

2. Carefully pry off the lens (A) with a small screwdriver.






With moonroof





Without moonroof





3. Remove the two mounting screws, then remove the map lights (B).

4. Disconnect the connectors (C) from the map lights.

5. Check for continuity between the terminals.






6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the map light.

7. Install the light in the reverse order of removal.