Alarm Module: Testing and Inspection

Immobilizer-Keyless Control Unit Registration

1. Have all registered keys and the PCM code.

2. Connect the HDS to the data link connector (DLC).

3. Turn the ignition switch to ON (II).

4. Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SETUP.

5. Select REPLACE IMMOBILIZER RECEIVER/CONTROL UNIT.

6. Do the registration according to the instructions on the HDS screen.

7. Check that the engine can be started with all registered keys, and check that the door locks operate using the Immobilizer key transmitter.