B1060

DTC Troubleshooting: B1060, B1061

DTC B1060:

Relay Control Module Lost Communication With Gauge Control Module (VPS/NE Message)

DTC B1061:

Relay Control Module Lost Communication With Gauge Control Module (A/T Message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Wait for at least 6 seconds.

4. Check for DTCs with the HDS.

Are DTCs B1060 and/or B1061 indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections.

5. Check for DTCs with the HDS.

B1060: Are DTCs B1011 and B1205 also indicated? B1061: Is DTC B1008 also indicated?

YES -

Do the gauge control module input test Component Tests and General Diagnostics.

NO -

Do the relay control module input test Testing and Inspection.