66-1

VSA DTC Troubleshooting: 66-1

DTC 66:

VSA Pressure Sensor (Hardware)

1. Turn the ignition switch to ON (II).

2. Clear the DTCs with the HDS.

3. Turn the ignition switch to LOCK (0) and then back to ON (II).

4. Check BRK PRESS in the VSA DATA LIST with the HDS.

Does the brake pressure increase when the brake pedal is pressed?

YES -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.

NO -

Replace the VSA modulator-control unit Service and Repair.