Engine Does Not Start With The Immobilizer Key

Immobilizer System Symptom Troubleshooting - Engine does not start with the immobilizer key

Engine does not start with the immobilizer key

NOTE: Before troubleshooting, check the items listed in General Check before Troubleshooting Immobilizer System Symptom Troubleshooting Information:

1. Try to start the engine.

Does the engine start?

YES -

Intermittent failure, the vehicle is OK at this time. Check Status Log Immobilizer System Status Log and check the line with the highest number of occurrences.

NO -

Go to step 2.

2. Turn the ignition switch to LOCK (0).

3. Turn the ignition switch to ON (II), and check the immobilizer indicator operation.

Does the indicator come on for 2 seconds, then go off?

YES -

Go to step 4.

NO -

Go to the immobilizer indicator blinks troubleshooting Immobilizer Indicator Blinks.

4. Turn the ignition switch to START (III).

Does the starter motor run?

YES -

Go to step 5.

NO -

Go to Starting System and check the starter motor.

5. Try to start the engine with the immobilizer key.

Does the engine start?

YES -

Go to step 6.

NO -

Go to the PGM-FI System Symptom Troubleshooting.

6. Wait for a few minutes with the engine running.

Does the engine stop?

YES -

Go to the PGM-FI System Symptom Troubleshooting.

NO -

The system is OK at this time.