In-Bed Trunk Lid Actuator Test

In-Bed Trunk Lid Actuator Test

1. Remove the in-bed trunk lid trim In-Bed Trunk Lid Latch Replacement.

2. Disconnect the 3P connector (A) from the in-bed trunk lid actuator/latch switch (B).






3. Test actuator operation by connecting battery power to the terminal No. 1 and grounding to the terminal No. 2. The actuator should work. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not work as specified, replace the in-bed trunk lid latch In-Bed Trunk Lid Removal/Installation.