Glow Plug Relay: Service and Repair

GLOW PLUG RELAY/CONTROLLER REPLACEMENT

1. Disconnect battery ground cable.
2. Remove console and engine cover.
3. Disconnect power cable at relay/controller (Figure 3-59)

Figure 3-59: Glow Plug Relay/Controller Location:

4. Disengage three connectors from glow plug controller.
5. Remove retaining bolt and remove relay.
6. Position relay/controller on bracket and install attaching hardware.
7. Engage connectors in relay/controller.
8. Connect power cable to relay/controller stud.
9. Install engine cover and console.
10. Connect battery ground cable.