Body - Revised Liftgate Strut Ball Stud Torque Spec.
Bulletin No.: 05-08-66-004Date: June 07, 2005
SERVICE MANUAL UPDATE
Subject:
New Liftgate Strut Ball Stud Tightening Specification
Models:
2003-2005 HUMMER H2
This bulletin is being issued to add the fastener tightening specification for the liftgate strut ball stud in the Body Rear End sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Liftgate Strut Ball Stud - 15 N.m (11 lb ft)
Disclaimer