Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Service and Repair >> Procedures >> Rearview Mirror
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rearview Mirror



REARVIEW MIRROR REPLACEMENT

REMOVAL PROCEDURE
1. Use a flat-bladed tool in order to remove the wire cover, if equipped.




2. Disconnect the electrical connector (4), if equipped.
3. Using a TORX-head(R) screwdriver, loosen the set screw that holds the mirror base to the windshield button.
4. Slide the mirror (3) off of the support.

INSTALLATION PROCEDURE




1. Slide the mirror (3) onto the mirror support.
2. Install the set screw.

NOTE: Refer to Fastener Notice .

Tighten the set screw to 2 N.m (18 lb in).

3. Connect the electrical connector (4), if equipped.
4. Install the wire cover (2), if equipped.
5. Ensure the wire cover is tucked into the forward edge of the headliner (1).
6. Re-calibrate the compass. Refer to Control Module References for programming and setup information.
pro multis · About Operation CHARM