Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Brake Pedal Assy >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pedal Assy: Service and Repair



Brake Pedal Assembly Replacement

Removal Procedure





1. Remove the pushrod retaining clip (4).
2. Remove the stoplamp switch (2) and the pushrod (3) from the brake pedal stud (1).





3. Remove the nut from the brake pedal bolt.
4. Remove the brake pedal bolt.
5. Remove the brake pedal.

Installation Procedure





1. Install the brake pedal.
2. Install the brake pedal bolt.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the nut to the brake pedal bolt.
^ Hold the nut with a wrench and tighten the brake pedal bolt to 47 Nm (35 ft. lbs.).





4. Install the pushrod (3) and the stoplamp switch (2) to the brake pedal pin (1).
5. Install the pushrod retaining clip (4).

pro multis · About Operation CHARM