Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Access Cover >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Access Cover: Service and Repair



Engine Sight Shield Replacement (6.0L (LQ4)

Removal Procedure





1. Loosen the intake manifold sight shield bolt.
2. Remove the sight shield from the sight shield retainer.
3. Remove the sight shield retainer bolts and the retainer, if required.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.

1. Install the sight shield retainer and the bolts, if required.
^ Tighten the retainer bolts to 5 Nm (44 inch lbs.).






Notice: Use care when installing the engine sight shield to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector. Loss of engine performance or engine damage may result.

2. Install the intake manifold sight shield to the retainer.
^ Tighten the bolt to 10 Nm (89 inch lbs.).
pro multis · About Operation CHARM