Console Replacement

CONSOLE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the console upper trim plate.
2. Disconnect the console electrical connector.




3. Remove the bolts holding center console to center console bracket.




4. Remove the center console.

INSTALLATION PROCEDURE




1. Align center console to center console bracket and route the electrical wiring through console.

IMPORTANT: Make sure HVAC duct is aligned with center console.

2. Connect the console electrical connector.




3. Install the center console to center console bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the center console bolts.

Tighten the bolts to 9 N.m (80 lb in).




5. Install the top panel to center console.