Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 66. Converter Housing Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

66. Converter Housing Installation



Converter Housing Installation

^ Tools Required
^ J 41510 T-50 Plus Bit





1. Important: Ensure converter housing and case face are clean before installing new pump seal.

Install the oil pump seal (5). Seat oil pump seal (5) by hand, between pump body and case. Ensure the seal is evenly seated.
2. Install the converter housing (102).

3. Notice: Refer to Fastener Notice in Service Precautions.

Install the converter housing bolts (94) to the transmission case. Use the J 41510.
^ Tighten converter housing bolts evenly in a star pattern sequence.
^ Tighten the converter housing bolts (94) to 65 - 75 Nm (48 - 55 ft. lbs.).
pro multis · About Operation CHARM