Shift Interlock Solenoid: Service and Repair

Automatic Transmission Shift Lock Actuator Replacement

Removal Procedure





1. Remove the console.





2. Disconnect the Shift Lock Actuator electrical connector (3).
3. Remove the Shift Lock Actuator fasteners and remove Actuator (2).

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions

Install the Shift Lock Actuator onto the shift selector and install fasteners (2).
^ Tighten the shift lock actuator fasteners to 2 Nm (18 inch lbs.).
2. Connect the electrical connector (3).





3. Install the console.