Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Gear Sensor/Switch >> Service and Repair >> Transfer Case Shift Control Switch Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Case Shift Control Switch Replacement



Transfer Case Shift Control Switch Replacement

Removal Procedure





1. Remove the instrument panel (I/P) cluster bezel.
2. Using a flat-tipped screwdriver, gently pry the retaining clips open on the housing.
3. Slide out the selector switch until the electrical connectors are accessible.
4. Disconnect the selector switch electrical connectors.
5. Remove the selector switch from the housing.

Installation Procedure





1. Position the selector switch close to the housing so the electrical connectors can be connected.
2. Connect the selector switch electrical connectors.
3. Slide the selector switch into the housing until the switch snaps into place.

Important: Make sure that the selector switch is seated properly in the housing before installing the I/P cluster bezel.

4. Install the I/P cluster bezel.
pro multis · About Operation CHARM