Window Run Channel Replacement - Rear Door

Window Run Channel Replacement - Rear Door

Removal Procedure

1. Raise the window to the full up position.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door (Rear Side Door Trim Panel Replacement) .
3. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door (Rear Side Door Water Deflector Replacement) .




4. Remove the 2 fasteners (1) retaining the run channel to the door.
5. Remove the run channel.



Installation Procedure

1. With the window in the full up position, position the run channel (2) in place inside the door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (1) retaining the run channel to the door.

Tighten the fasteners to 9 Nm (6 lb ft).





3. Install the water deflector. Refer to Water Deflector Replacement - Rear Door (Rear Side Door Water Deflector Replacement) .
4. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Front Side Door Trim Panel Replacement) .