Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair >> Wiper Motor Replacement - Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Motor Replacement - Rear



WIPER MOTOR REPLACEMENT - REAR

REMOVAL PROCEDURES
1. Remove the rear wiper arm.

IMPORTANT: Cycle the wiper one time to ensure it is in the parked position.




2. Remove beauty cover (2) by twisting counterclockwise.
3. Remove the rear wiper arm nut (3) and the weatherseal (4).
4. Open the liftgate.
5. Remove the liftgate trim panel.




6. Disconnect the rear wiper motor electrical connectors from the liftgate (4).
7. Remove the rear wiper control module.
8. Remove the fasteners (1) retaining the wiper motor to the liftgate (2).
9. Remove the rear wiper motor from the liftgate.

INSTALLATION PROCEDURE




1. Position the rear wiper motor (4) into place in the liftgate (2).
2. Install the fasteners retaining the wiper motor (4), but do not tighten.




3. Install the weatherseal (4) and the rear wiper arm nut (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear wiper arm nut to 6 N.m (4 lb ft).

4. Tighten the rear wiper motor fasteners.

Tighten the rear wiper motor fasteners to 9 N.m (7 lb ft).

5. Connect rear wiper motor electrical connectors.
6. Install the rear wiper motor control module.
7. Install the liftgate trim panel.
8. Install the beauty cover (1).
9. Install the rear wiper arm.
pro multis · About Operation CHARM