Stability System Caution Indicator Inoperative

Stability System Caution Indicator Inoperative

Diagnostic Fault Information

Important: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Diagnostic System Check - Vehicle

Circuit/System Description

The instrument panel cluster (IPC) illuminates the stability system caution indicator by supplying ground to the lamp. The electronic brake control module (EBCM) sends a serial data messages to the IPC, in order to command the indicator ON or OFF.

Circuit/System Testing

Note:Diagnose all vehicle DTCs before using this diagnostic.

With the scan tool, select instrument panel special functions Lamp Test. Command the instrument panel warning lamps ON.

If the stability system caution indicator does not turn on, replace the IPC.

Repair Instructions

Important: Always perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Control Module References for EBCM and IPC replacement, setup, and programming