A/T - Fluid Leak From The Bell Housing Area

AUTOMATIC TRANSAXLE OIL LEAK BEHIND TORQUE CONVERTER

MODEL: ALL

DESCRIPTION:

Some transaxles may experience an oil leak in the bellhousing behind the torque converter. If this occurs the oil leak will be observed at the drain hole on the lower surface of the transaxle.

REPAIR DIAGNOSIS:








If you are servicing a vehicle with an oil leak in the bellhousing area behind the torque converter refer to the table to determine the proper repair procedure:

REPAIR PROCEDURE:

1. Remove the transaxle.

2. Remove the torque converter.

3. Use a suitable tool to remove the oil seal.








4. Apply a thin coat of ATF to the lip of the oil seal before installation. Use the special tool (09452-21200) to install the oil seal to the oil pump housing.





WARRANTY INFORMATION