A/T - Reman A/T Installation Precautions
SOURCE: Hyundai Tech Net Times Volume 14 Issue 3 2004TITLE: ATM Installation
APPLIES TO: All
SERVICE TIP:
Remanufactured transaxles are shipped with a retaining strap to hold the torque converter in place. Do not remove the strap until the transaxle is mounted on the transmission jack and ready for installation.
If the torque converter has moved from the fully inserted position, carefully push inward and rotate the torque converter until the converter is recessed approximately 1/2"-3/4" into the transaxle case.
NOTE: If the converter is not fully seated as shown, the oil pump will be damaged and the vehicle will not move after installation.