Air Cleaner Housing: Service and Repair

DISASSEMBLY





1. Remove the air duct connected to the air cleaner.
2. Disconnect the intake air temperature sensor harness.
3. Remove the air intake hose from the air cleaner side.
4. Remove the air cleaner cover and filter.
5. Remove the air cleaner mounting bolts and remove the air cleaner.

INSPECTION





1. Check the air cleaner body, cover, or filter for distortion, corrosion or damage.
2. Check the air duct for damage.





3. Check the resonator for distortion or damage.
4. Check the air cleaner filter for restriction, contamination or damage. If the filter is slightly restricted, remove dust and other contaminants by blowing air from the upper side through the filter.
5. Check the air cleaner housing for restrictions, contamination or damage.

REASSEMBLY
Install the air cleaner is the reverse order of removal.