Fluid Type Specifications

Contact Surface Of Release Bearing And Fulcrum Of:
Clutch Release Fork Molywhite TA No. 2
Inner Surface Of Clutch Release Bearing Molywhite TA No. 2
Inner Surface Of Clutch Release Cylinder and Outer Circumference Of:
Piston and Cup Brake Fluid DOT3
Inner Surface Of Clutch Disc Spline Molywhite TA No. 2

Inner Surface Of Clutch Master Cylinder And Outer Circumference Of:
Piston Assembly Brake Fluid DOT 3
Clutch Master Cylinder Push Rod, Clevis Pin And:
Washer Wheel Bearing Grease SAE J310a, NLGI No. 2
Clutch Pedal Shaft and Bushings SAE J310a, Chassis Grease, NLGI No.1
Contact Portion Of Release Lever To Release Cylinder:
Push Rod MOLYWHITE TA No.2
Transaxle Input Shaft Spline Molywhite TA No. 2