Direct Clutch - F5A51 Model

DISASSEMBLY





1. Disassemble the snap-ring with special tool.

REASSEMBLY





1. Align the spaces between the teeth (A) on the clutch plates, clutch discs, and clutch reaction plate to the outer circumference hole (B) in the direct clutch retainer.
2. Install the clutch reaction plate.





3. Check that the clearance between the snap ring and the clutch reaction plate is within the standard value. When measuring the clearance, press the clutch reaction plate by the force of 5 kg evenly. If not within the standard value, select a snap ring to adjust.
Standard value: 1.0 - 1.2 mm