Alignment - Specifications
Group: CHASSISNumber: 99-50-O08
Date: OCTOBER, 1999
Model: ALL
Subject: ALIGNMENT SPECIFICATIONS
DESCRIPTION:
This bulletin is being issued to communicate, in chart form, the final 1999 and the initial 2000 model year vehicle alignment specifications.
Specifications provided in these charts are the latest available and supersede any that have been previously published.
2000 MODEL YEAR ALIGNMENT SPECIFICATIONS (DEGREES) CHART:
NOTES:
* Angle is not adjustable
Toe-in = Positive Toe
Camber-out = Positive Camber
Cross Camber = LH Camber - RH Camber
Cross Caster = LH Caster - RH Caster
Vehicle may tend to lead or drift:
1. Towards the side with the most positive camber
2. Towards the side with the least positive caster
CONVERSIONS:
Toe: 3 mm = approximately 0.29 °
Angle: 1 degree = 60° (1 Degree = 60 minutes)
1999 MODEL YEAR ALIGNMENT SPECIFICATIONS (DEGREES) CHART:
NOTES:
* Angle is not adjustable
Toe-in = Positive Toe
Camber-out = Positive Camber
Cross Camber = LH Camber - RH Camber
Cross Caster = LH Caster - RH Caster
Vehicle may tend to lead or drift:
1. Towards the side with the most positive camber
2. Towards the side with the least positive caster
CONVERSIONS:
Toe: 3 mm = approximately 0.29 °
Angle: 1 degree = 60° (1 Degree = 60 minutes)