Downloading Reprogramming Software

1. Reprogramming software pack 09-15-00 is required for this campaign.





2. If you do not already have this software, log on to the Service Technology Web Site (www.hmaservice.com) and click on "Hi Scan Software Updates."

NOTE:
This software can be downloaded to your HDS or to a PC.





3. Select "Latest Software"





4. Scroll down to "Reprogramming Software Pack 09-15-00". This software package contains four separate programs. The revised ECM program for the 1999-2000 Sonata that is required for Campaign 39 is included in this group.





5. Right click on "Reprogramming Software Pack 09-15-00" and then click on "Open".





6. If you are doing this procedure from HDS, select "Run this program from its current location" and click "OK"





7. A warning message may appear. Just click "Yes" to continue.





8. After about 10 minutes of downloading, this window pops up. Just click "Start" and the new Hi-Scan Software will be automatically placed in the proper directory.

9. To update the reprogramming card in the Hi-Scan refer to TSB 00-00-001 for instructions.

NOTE:
When the reprogramming card is being updated in the Hi-Scan, remove the "SOL" and "INFO" cards and only leave the "Reprogramming card installed.