Defrosting/Defogging

DEFROSTING/DEFOGGING




To remove the interior fog on the windshield:
- Set the air flow control to the defrost (Defrost-Level) position.
- Set the air intake control to the fresh air (Fresh) position.
- Set the temperature control at the desired position.
- Set the fan speed control between the 1 and 4 position.
- If vehicle is so equipped, push on the A/C for increased defogging action.




To remove the frost or exterior fog on the windshield:
- Set the air flow control to the defrost (Defrost-Level) position.
- Set the air intake control to the fresh (Fresh) position.
- Set the temperature control to the warm.
- Set the fan speed control to position 3 or 4.

OPERATION TIPS
- To keep dust or unpleasant fumes from entering the car through the ventilation system, temporarily set the air intake control at the Recirculation position. Be sure to return the control to the Fresh position when the irritation has passed to keep fresh air in the vehicle.
- Air for the heating/cooling system is drawn in through the grilles just ahead of the windshield. Care should be taken that these are not blocked by leaves, snow, ice or other obstructions.