Circuit Description

Circuit Description
Battery voltage is applied at all times from the positive battery terminal to the ignition switch and the normally open starter relay contacts When the ignition switch is turned to START and the transaxle range switch (automatic transaxle) is in the P/N position, or the clutch pedal position switch (manual transaxle) is closed, battery voltage is applied through the is fusible link to the starter relay coils, and then the coil is energized.

Battery voltage is applied to the starter solenoid through the starter relay closed contacts, the and the start motor engages to start the engine.

The ETACS control module controls the starting system through the burglar alarm relay coil (with burglar alarm).