Fluid - M/T: Service and Repair

REPLACEMENT OF TRANSAXLE GEAR OIL
Use HP Gear Oil SAE 75W/90 (API-GL-4).
1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.
2. Replace the gasket with a new one and install the drain plug.
3. Remove the speedometer gear.
4. Add the specified amount and type of oil into the speedometer gear hole until the level reaches "F" on the speedometer driven gear.
Capacity : 2.43 US qt (2.3 lit, 2.1 Imp qt)
5. Verify that the oil level is between "F" and "L" on the speedometer gear.
6. Install the speedometer gear on the clutch housing of the transaxle.
7. Warm up the vehicle until the transaxle oil reaches its normal temperature, then check for leakage of transaxle oil.